![]() If you only see the metal bottom of the machine, then the waste toner box is not installed. The waste toner is black with a foam roller and a green handle on it. Once the belt unit is removed from the machine, the waste toner box should be visible. Hold the green handle of the belt unit and lift the belt unit up, then pull it out.Ĥ. Repeat this step for all 4 drum units and toner cartridge assemblies.ģ. Place the drum unit and toner cartridges assemblies on a piece of disposable paper or cloth to avoid spilling and scattering the toner. Each drum unit and toner assembly can be removed by grasping the center of the drum and toner assembly and pulling it straight up. Take out the drum unit and toner cartridge assembly. The top cover is completely open when the cover locks in place and does not require support from you.Ģ. Lift open the top cover using the indented handle in the center until you hear a click.įailure to completely open the top cover when removing and installing consumables may cause severe damage to the machine. ![]() Visit to purchase supplies and accessories.ġ. This maintenance can be performed by the end user. When you see this message, you must replace the waste toner box, part number WT220CL. The message 'Replace WT Box' will appear on the LCD of the Brother machine when the waste toner box is full and needs to be replaced.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |